Scroll Saws
This page is to provide information regarding the different scroll saws that are available on the market for comparison and list them on one page. This is not a review nor an endorsement of any particular brand or model of scroll saw.
The scroll saws listed are in alphabetical order of the manufacturer.
The description and specification details for each of the scroll saws listed on this page are copied from the manufacturer or the retailer’s web page or both.
Also, as a convenience, some of the links on this page are to affiliate sites such as Home Depot, Walmart, Amazon, and others which scrollsawnewb.com is a participant. These are indicated by the *.
*
BUCKTOOL 16-inch Variable Speed Scroll Saw
The Bucktool Model SSA16LVF 16-Inch Scroll Saw is perfect for any woodworker that’s looking for a quality and powerful scroll saw, provides the user with the flexibility to work with a variety of materials.
- Variable Speed: 1.2-Amp DC Motor for Quiet, Smooth Performance
- LED Worklight: Vibration-free LED light with no light bounce provides a clear view when cutting
- Pedal Switch Design: With a hands-free convenience pedal switch for easily stop and start the tool with the tap of your foot when you need to drill a new hole, change blade, or if an emergency occurs
- Quick-Change Blade System: Quick-Change Blade System with Quick open side panel and user-friendly blade holder, easy for blade changing, attached with 3 blades 2 with pin and 1 pinless
- Cast Iron Table: Heavy-duty 16-by-9-inch cast iron work table bevels up to 45 degrees to the left for angled cuts. Cutting depth is 2-Inch with a 16-Inch throat depth
Product Information:
· 1.2-Amp DC Motor
· Table Bevel: 0°- 45°
· Table Size: 9 x 16 inch
· Blade Size: 5-inch pinned & pinless
· Blade Speed: 550 to 1600 SPM
· Cutting Depth: 2 inch
· Throat Depth: 16 inch
*
Central Machinery 16 in. Variable Speed Scroll Saw
This variable-speed scroll saw does a beautiful job cutting highly intricate curves and designs quickly and precisely. This versatile scroll saw has a tilting table for making precise bevel cuts. A built-in air pump keeps your line of sight clear of sawdust to help you make detailed scrolling cuts. This scroll saw has a cast iron base for less vibration and variable speed control for working with a wide range of materials.
This scroll saw accepts pinned blade types.
Features
- Variable speed for working with a wide range of materials
- 16-1/4 in. L x 9-7/8 in. W x 3/8 in. H table tilts 0-45 deg. left for bevel cuts
- Cuts wood up to 2 in. thick
- 16 in. throat
- Cast iron base for less vibration
- Predrilled base holes for easy bench mounting
Specifications
- Name – 16 in. Variable Speed Scroll Saw
- SKU – 62519
- Brand – Central Machinery®
- Amperage (amps) – 1.2
- Certification – UL
- Material – Cast iron base
- Speed (max) – 400-1600
- Blade length (in.) – 5 in.
- Depth of cut (in.) – 2
- Product Weight – 23.00
- Shipping Weight – 25.75 lbs.
- Stroke length (in.) – 1
- Table dimensions – 16-1/4 in. L x 9-7/8 in. W x 3/8 in. H
- Throat depth (in.) – 16
- Accessories Included – Blade, two blade adapters, hex keys
- AC Volts – 120
*
CHERVON NA/SKIL 3335-07 16″, Scroll Saw With Light
16” Scroll Saw with Light is manufactured with
Features an integrated dust removal system for a cutline free of debris, a 1-1/2” dust port allowing work area to stay clear of dust and an articulating LED work light ensuring workpiece is clearly lit. Includes convenient on-tool blade storage keeping blades handy when needed and a keyless blade change for hassle-free blade changes.
Features
- Integrated dust removal system keeps cutline free of debris
- Articulating LED
worklight ensures that thework piece is clearly lit.1.5 inches - Dust port keeps work area clear of dust
- Dust port accepts
standard shop-vac hose - Electronic variable speed control helps cut a variety of materials
- Tilting 16″ x 10″ work table tilts 0-45 degrees for precise cuts
- 16″ throat allows for cutting thicker pieces
- On-tool blade storage keeps blades handy when needed
- Accepts both pin-end and plain-end 5” length blades
Specifications
- Length — 16 in.
- Width — 10 in.
- AC Voltage — 120V
- Amperage — 1.2A
- Blade Speed (SPM) — 500 – 1,700
- Cutting Capacity (45 Degrees) — 1 in.
- Cutting Capacity (90 Degrees) — 2 in.
- Cutting Stroke — 7/8 in.
- Table Construction — Cast Iron
- Table Dimensions — 16 in. x 10 in.
- Table Tilt (Left) — – 45 Degrees
- Throat Capacity — 16 in.
- Item Weight — 34.6 pounds
- Product Dimensions — 26 x 13.2 x 14.6 inches
*
Craftsman 16 in. Variable Speed Scroll Saw
This CRAFTSMAN Scroll Saw measures 16 inches from blade to the throat so it’s as versatile as it is powerful. This variable speed saw provides from 400 to 1600 strokes per minute, giving you the versatility you need to cut through soft and
A large cast iron work table with up to 45-degree tilt also allows you to really expand your bag of tricks with fancy moves like bevel cutting.
Features
- 1.6 amp scroll saw offers a 60 Hz motor and operates at 120V
- Variable speed from 400 to 1,600 strokes per minute
- Cuts through soft or hardwoods, plastic, and soft metals
- Large cast-iron table tilts up to 45° degrees for bevel cutting
- Accepts standard 5″ pin and plain-end blades
- 2″ maximum cutting thickness at 90° degrees; 1″ at 45° degrees 16″ depth of throat
- Multi-directional dust blower keeps cutting line free of dust and debris
- Dust extraction port connects to shop vacuum for easy cleanup
- Onboard storage conveniently holds extra blades
- Includes 4 pin and blank-end blades & blade wrench
Specifications
- Amps – 1.6 Amps
- Strokes/Min – 1600 spm
- Stroke Length – 0.75 in
- Depth of Cut (inches) – 2 in
- Tool Weight – 38 lbs
- Tool Length – 23.6 in
- Tool Height – 14 in
- Power Tool Type – Corded
- Variable Speed – YES
- Max Cut at 90° – 2 in
- Max Cut at 45° – 1 in
*
Dayton Scroll Saw, 1.2A@120V, 16In Throat Depth
Corded/Cordless: Corded | Blade Stroke: 3/4″ |
Blade Length: 5″ Pinned | Corded/Banded: Corded |
Features: Adjustable Shoe, Aluminum Table Construction, Quick Change, 60 Deg Table Tilt Range Left | No Load RPM: 550 to 1650 |
Item: Variable Speed Scroll Saw | Throat Depth: 16″ |
Amps: 1.2 | Table Dimensions: 10″ x 16-1/4″ |
Cutting Capacity: 2″ @ 90 Degrees , 3/4″ @ 45 Degrees | Country of Origin (subject to change): China |
*
Dayton Variable Speed Scroll Saw, 1.2Amps@120V
Variable Speed Scroll Saw, Amps 1.2, Blade Length 5 In., Blade Stroke 3/4 In., Cutting Capacity 2 In. @ 90 Degrees, 3/4 In. @ 45 Degrees, No Load RPM 550 to 1650, Throat Depth 18 In., Table Dimensions 10-1/4 In. x 19-1/4 In.
Amps: 1.2 | No Load RPM: 550 to 1650 |
Corded/Banded: Corded | Cutting Capacity: 2″ @ 90 Degrees , 3/4″ @ 45 Degrees |
Blade Stroke: 3/4″ | Blade Length: 5″ Pinless |
Features: Adjustable Shoe, Cast Iron Table Construction, Quick Change, 60 Deg Table Tilt Range Left, 10 Deg Table Tilt Range Left | Throat Depth: 18″ |
Corded/Cordless: Corded | Item: Variable Speed Scroll Saw |
Table Dimensions: 10-1/4″ x 19-1/4″ | Country of Origin (subject to change): China |
*
Delta Power Tools 40-694 20 In. Variable Speed Scroll Saw
The 40-694 20″ variable speed scroll saw is designed for quality and precision.
The large, cast-iron table provides excellent material support and bevels 0° – 45° left and right.
The unique dual parallel-link arm design reduces vibration and noise and keeps the blade perpendicular to the work surface which dramatically reduces over or undercutting, improving accuracy and quality.
The single lever, tool-free blade tensioning allows for quickly adjusting the blade to the proper tension which maximizes blade life and accuracy.
Features
- Electronic variable speed can be adjusted from 400-1,750 SPM for a wide array of cutting applications.
- Unique dual parallel-link arm design reduces vibration and noise and keeps the blade perpendicular to the work surface which dramatically reduces over or
under cutting , improving accuracy and quality. - Upper arm lifts and locks in the raised position during blade changes or while adjusting blade position for
fret work . - On/Off switch, electronic variable speed dial, flexible dust blower and, blade-tensioning lever are all conveniently located up front on the arm for easy accessibility.
- Tool-free blade clamp allows for quick, easy blade changes in seconds
- Single lever, tool-free blade tensioning allows for quickly adjusting the blade to the proper tension which maximizes blade life and accuracy.
Large , cast-iron table provides excellent material support and bevels 0° – 45° left and right.- On-tool blade storage area provides neat, organized protection for scroll saw blades, includes 2 straight blades.
Specifications
- Motor: 1.3 Amp
- Speeds: 400-1,750 SPM
- Capacity: 20 in.
- Stroke Length: 3/4 in.
- Table Size: 16 in. x 24 in.
- Table Tilt: 0°-45°, Left and Right
- Cutting Capacities: at 90°: 2 1/8 in. at 45°: 1 5/8 in.
- Assembled Depth: 39 in.
- Assembled Width: 16 in.
- Accepts Pinless Blades
*
DEWALT DW788 1.3 Amp 20-Inch Variable-Speed Scroll Saw
The DW788 20″ Variable-Speed Scroll Saw operates quietly and smoothly for accuracy. The tool-free blade clamp allows for quick and easy blade changes.
Convenient placement on the liftable arm of the dust blower, power switch, and saw adjustments on the front of the upper arm
Features
- Double parallel-link arm design dramatically reduces vibration and noise for extremely accurate cuts
- On-off switch, electronic variable speed, flexible dust blower, and blade-tensioning lever are all located on the front upper arm
- Arm design keeps the blade perpendicular to the work, dramatically reducing over or
undercutting - Tool-free blade clamps allow blade changes in seconds
- Accepts Pinless Blades
- Arm lifts so that blade can be easily threaded through the material for inside cuts
Oversized , cast-iron table provides excellent material support and bevels 45 degrees (left and right)- Motor 1.3 amp rating, 120V AC. 400-1,750 cutting strokes per minute.
- Table size 16″ x 23-3/4″.
- Weighs 56 lbs. Meets OSHA standards, CSA approved and U.L. Listed.
- Stand Not Included.
- Featured length of the flexible shaft is approximately 22 inches long.
Specifications
- Amps – 1.3 Amps
- Depth of Cut – (inches) 2 in
- Power Tool Type – Corded
- Stroke Length – 3/4 in
- Strokes/Min – 400-1,750 spm
- Tool Weight – 56 lbs
*
Dremel MS20-01 Moto-Saw Variable Speed Compact Scroll Saw
The Dremel Moto-Saw offers a compact and easy solution for making detailed cuts in a variety of materials including wood, plastic, laminates
This scroll saw accepts pinned blade types
Features
- Dust port adapter keeps line-of-sight clear and work space clean
- Auto tensioning quick-change mechanism for easy accessory change and optimal blade tensioning
- Detachable coping function for handheld use to take the tool to the work piece
- Variable-speed control for optimal cutting in a variety of materials
- Fast-clamp base attaches to various tables, benches and surfaces
Specifications
- Dust Collection – Yes
- Contents –
Moto Saw , Fast Clamp Base, Storage Case, (1) Side Cutting Blade, (4) Wood and Plastic Blade, (4) Fine Wood Blade, (1) Metal blade, Vacuum Adapter - Warranty – Limited 2 Years
- Cord Length – 9 ft
- Length – 9.84 “
- Horsepower – 0.1
- Amperage – 0.6
- Max. Bevel Capacity (°) – 0
- Stroke Length – 0.315
- Width – 8.5 ”
*
Excalibur – EX-21 21″ Tilting Head Scroll Saw
The Excalibur 21″ variable speed scroll saw’s unique design provides a stable platform when cutting straight or on an angle.
Unlike other scroll saws where the Table is Tilted for angles cuts, the entire head of the Excalibur tilts 45 DEG to the left or the right. This allows the user to better control the workpiece on a Flat Table surface, for a
Solidly built upper and lower parallel arms keep the blade straight with minimal blade deflection allowing for precise cuts.
ETL Certified and
Features
- Upper and lower blade guard assembly
helps prevent accidental hand contact with the blade. - Switch protection device to prevent unintentional start-up.
- Dust collector table kit for direct dust extraction hook-up.
- Head tilts 38° left and 45° right, tilting the blade, not the table keeping the workpiece level for better control & more accurate cuts.
- 21″ throat capacity.
- 2″ maximum cutting depth.
- Large 13 1/2″ x 23 1/2″ table surface.
- Quick blade changes with finger operated blade clamps, no tools required.
- Easy access speed and tension controls.
- Onboard dust blower.
- Organized blade storage on base.
Specifications
- Length – 32” (812 mm)
- Width – 15” (380 mm)
- Height – 15” (380 mm)
- Blade tilt range – 38° (left) to 45° (right)
- Throat – 21” (535 mm)
- Maximum cutting depth – 2” (51 mm)
- Speed (variable) – 400 to 1550 stroke/min
- Table dimensions – 13 1/2” x 23 1/2” (345 x 597 mm)
- Motor – 120 V, 1.3 A
- Weight (shipping / net) – 79 lbs (36 kg) / 65 lbs (29.5 kg)
- Accepts Pinless Blades
Excalibur – EX-30 30″ Tilting Head Scroll Saw
Features
- Upper and lower blade guard assembly
helps prevent accidental hand contact with the blade. - Switch protection device to prevent unintentional start-up.
- Dust collector table kit for direct dust extraction hook-up.
- Head tilts 38° left and 45° right, tilting the blade, not the table keeping the workpiece level for better control & more accurate cuts.
- 30″ throat capacity.
- 2″ maximum cutting depth.
- Large 14″ x 32 1/2″ table surface.
- Quick blade changes with finger-operated blade clamps, no tools required.
- Easy access speed and tension controls.
- Organized blade storage on base.
- Onboard dust blower.
Specifications
- Length – 43 1/4” (1100 mm)
- Width – 15 1/2” (394 mm)
- Height – 15 1/4” (387 mm)
- Blade tilt range – 38° (left) to 45° (right)
- Throat capacity – 30” (762 mm)
- Maximum cutting depth – 2” (51 mm)
- Speed (variable) – 400 to 1550 stroke/min
- Table dimensions – 14” x 32 1/2” (358 x 825 mm)
- Motor – 120 V, 1.3 A
- Weight (shipping / net) – 116 lbs (53 kg) / 97 lbs (44 kg)
- Accepts Pinless Blades
*
General International 16 in. 1.2a Variable Speed Scroll Saw With Flex Shaft LED Light
The 16 in. Variable Speed
The variable speed ranges anywhere from 400 to 1600 strokes per minute and can be easily adjusted by the speed knob located on the front of the machine.
The spacious 16-by-10-inch table bevels up to 45 degrees to the left.
Easily cut in woods up to 1.9 in. thick while the 16-in. throat depth allows for the manipulation of larger
The General Scroll Saw also has a 9/16 inch stroke with the allowance of both pinned and pinless blades. These fit securely in our Patented blade holder.
The sturdy cast
The tension-release switch is easily accessible right at the top of the machine, as well as easy-access motor brushes. The cutting speed is easily set with
The Flexi shaft dust blower clears saw dust from your work area as you saw to give you precise cuts with a clear line of vision. This combined with the
The saw also includes a clamp for securing your project in place along with a flexible work light that bends and adjusts to whatever position your desire.
The Flex Neck LED lighting system also allows you to highlight the work material where you want it. A convenient slide storage compartment is built into the housing for spare blades and wrenches.
*
Grizzly Industrial G0734 16″ Scroll Saw
Features:
- Motor: 1/8 HP, 120V, DC, variable speed: 550 to 1600 SPM
- Tool-less blade changes
- Uses 5″ long pin or pin-less blades
Blade can be turned 90°- Adjustable lamp
- 16-1/4″ L 10″ W cast aluminum table
- Table tilt: 45°Dust blower
- Dust port
- Includes blades (2), blade guard (1), blade adapters (2), and hex wrenches (2)
- Blade stroke: 3/4″
- Cutting capacity: 2″ at 0°; 25/32″ at 45°
- Approximate shipping weight: 30 lbs.
Hawk Precision Scroll Saw
Features
- Long 7/8″ Blade Stroke for faster, cleaner cuts that need little to no sanding!
- Pressure Foot gives maximum control even when making those intricate cuts that are so popular with
scroll saw users. - Large Cast Aluminum Table(13 1/2″ Diameter) provides a large work area in front of the centrally located blade for better control and more support of your work.
- Adjustable Nose allows you to tilt the blade slightly for more aggressive cutting.
- Work Table Tilts a full 45° both left AND right!
- Use any 5″ Pinless Blade. We stock over 70 blades so we have a blade to cut material you want to cut.
- Top or Bottom Feed lets you choose the way you prefer to insert the blade for your
fret work . - Table-Forward Design is comfortable to sit at with a shop stool.
- Rear Cam Over for quick release and precise setting of blade tension. More accurate than plucking the blade and turning a knob!
- Precision Crafted Steel Base and Heavy Duty Legs made from 10 gauge steel for greater stability and long-lasting durability.
- Front Cam Over tension release of
upper blade holder allows you to change the blade in seconds. This allows you to make inside cuts quickly and easily. - Quick Change Blade Holders allow you to have either blade holder pre-loaded for quick blade style change out.
- Both the top and bottom blade holders clip into place
- Safety Spring and Stop for safer operation even if the blade breaks.
- Totally Enclosed DC Motor gives you complete control of the speed throughout the entire speed range. The motor is TENV to keep out harmful dust. The controller is designed to yield full torque over the entire speed range without overheating or stalling.
- Flex Bellows and Loc-Line keeps the cutting area clean for greater visibility and safety.
- Machined and Casted Parts for quality that lasts a lifetime.
- Engineered to run quietly and limit vibration.
Specifications
SPECIFICATIONS – BM-20 / BM-26
- Throat Capacity – 20″ / 26″
- Max. Cutting Thickness – 2 1/2″ / 2 1/12″
- Cutting SPM – 100-1750 / 100-1750
- Work Table – 13 1/2″ / 13 1/2″
- Max. Forward Tilt (extension on back legs only) – 15 Deg. / 12 Degree
- Table Over Hang – 7″ / 7″
- Motor – DC TENV / DC TENV
- Mounting – 10 Gauge Steel Legs / 10 Gauge Steel Legs
- Weight – 93 Pounds / 97 Pounds
- Floor Space Requirements – 19 1/2″ x 33″ / 19 1/2″ x 39″
- Manufacturer’s Warranty – 1 Year / 1 Year
Dimension H
- Cutting Table Height
- Standard Legs – 39″ / 39″
- Standard Legs w/Extensions – 43 1/2″ / 43 1/2″
- Chair Legs – 31″ to 38″ / 31″ to 38″
- Bench Legs – 13″ / 13″
Dimension K Overall Height
- Standard Legs – 47 / 47″
- Standard Legs w/Extensions – 51 1/2″ / 51 1/2″
- Chair Legs – 39″ to 46″ / 39″ to 46″
- Bench Legs – 21″ / 21″
Dimension A
- Standard Legs – 29″ / 35″
- Chair Legs – 29″ / 35″
- Bench Legs – 24″ / 30″
Dimension B
- Standard Legs – 19″ / 19″
- Chair Legs – 41″ / 41″
- Bench Legs – 14″ / 14″
Shipping Dimensions
- Box # 1 Saw – 39″ x 21″ x 20″ 96# / 39″ x 21″ x 20″ 105#
- Box # 2 Standard Legs – 7″ x 7″ x 37″ 30# / 7″ x 7″ x 37″ 30#
- Box # 2 Chair Legs – 7″ x 7″ x 37″ 38# / 7″ x 7″ x 37″ 38#
- Box # 2 Bench Legs – 7″ x 7″ x 15″ 8# / 7″ x 7″ x 15″ 8#
*
Hegner 18″ Variable Speed Scroll Saw
The HEGNER 18″ Variable Speed saw is compact, quiet, precise and versatile, lets you cut almost any material and make a wide variety of projects. HEGNER scroll saws are known for easy blade installation, long blade life, superb cutting control, smooth and quiet operation, accurate sawing, smooth edges without sanding, and unsurpassed reliability. The 18-V is Hegner’s most popular model.
Features
- Double Quicklock Tensioning System
- Electronic Variable Speed Induction Motor
- Highly Precise and Reliable
- 7 Year Manufacturer’s Warranty against defects
Specifications
- Weight – 50 pounds
- Voltage – 110 volts
- HEGNER saws use standard 5” plain-end blades
*
Jet JWSS-22B Scroll Saw
Specifications (from the manual)
Model number JWSS-22B
Stock numbers:
- Scroll saw with foot switch – 727200B
- Scroll saw with foot switch and stand – 727200K
- Optional stand only – 727200S
Motor and Electricals:
- Motor type – brushed DC Horsepower – 1/16 HP (50W)
- Phase – single
- Voltage – 120 V
- Cycle – 60Hz
- Listed FLA (full load amps) – 1.3 A
- Starting amps. – – 2 A
- Running amps (no load) – 0.5 A
- On/off switch —rocker style, and foot pedal
- Power cord– 18 AWG, 6 ft. (183 cm)
- Power plug installed (saw and foot pedal) – 15 amp
- Foot pedal cord length – 7.2 ft.
- Recommended circuit and fuse/breaker size1- 15A
- Overload fuse – 3.15A, 250V
Blade and Capacities:
- Stroke — 3/4 in. (18.6 mm) Speed — variable, 400 to 1550 stroke/min.
- Throat capacity — 22-3/8 in.
- Blade type used — plain-end (pinless) 5 in.
- Blades included — (5) Skip type
- Maximum cutting depth — 2 in. (51 mm)
- Arm tilt — 45 degrees left; 45 degrees right
Main Materials:
- Body and tool tray — steel
- Main table — ground cast iron Trunnion — steel
- Arm — steel, plastic cover
Table:
- Table dimensions (LxW) — 23.62 x 12.67 in. (600 x 322 mm)
- Table slot width — 5 mm
- Table height from floor, on optional stand — adjustable; 32 to 38 in.
- Distance front edge of table to blade (approximate) — 3-5/8 in. (92 mm)
Dimensions:
- Optional stand footprint (LxW) — 28 x 25-1/2 in. (711 x 648 mm)
- Overall dimensions – saw only (LxWxH) — 33 x 15-1/2 x 17-1/2 in. (838 x 394 x 445 mm)
- Overall dimensions – saw on stand (LxWxH) — 33 x 25-1/2 x 48 in. (838 x 648 x 1219 mm)
- Shipping dimensions – saw only — 35.4″ x 17.7″ x 18.9″ (900mm x 450mm x 480mm)
L = length; W = width; H = height
Dust collection:
- Dust port outside diameter — 1-1/2”
- Recommended dust extraction volume — 300–350 CFM (8.5–10 CMM)
Weights:
- Net weight, saw only — 68.2 lbs (31 kg)
- Net weight, optional stand only — 21.5 lbs (9.8 kg)
Pegas Scroll Saw, SCP16CE, SCP21CE, SCP30CE
Features
- The head can be tilted by 45° to left or right. The blade tilts rather than the table to achieve:
- The upper arm lifts to allow easy and rapid blade changes: a real advantage for work involving various interior cuts.
- The manual blade-clamping system does not require the use of a tool. The user changes blades very quickly.
Meanwhile the tensioning system allows the same tension to be applied to the blade whenever it is changed. - Easy access to the start/stop switch and the speed regulator, positioned on the front of the upper arm.
- The onboard dust blower paired with the dust collector
provide direct and efficient dust extraction. - Accepts Pinless Blade types
Specifications
Specifications | SCP16CE | SCP21CE | SCP30CE |
Total length | 686 mm | 812 mm | 1100 mm |
Total width | 380 mm | 380 mm | 394 mm |
Height | 432 mm | 380 mm | 387 mm |
Blade tilt range | Links 0° – 45° Right 0° – 38° | Links 0° – 45° Right 0° – 38° | Links 0° – 45° Right 0° – 38° |
Throat | 406 mm | 535 mm | 762 mm |
Max. cutting depth | 52 mm | 52 mm | 52 mm |
Speed RPM | 400 to 1400 | 400 to 1400 | 400 to 1400 |
Table format | 305 x 470 mm | 345 x 597 mm | 358 x 825 mm |
Motor | 220 – 240V – 1.5 A | 220 – 240V – 1.5 A | 220 – 240V – 1.5 A |
Gross weight / Net weight | 31 / 24.5 kg | 36 / 29.5 kg | 53 / 44 k |
Pegas® Scroll Saws are high-precision tools, which with a minimum amount of maintenance, will provide reliable service and great satisfaction for many years.
*
PORTER-CABLE 18″ PCB375SS Variable Speed Scroll Saw
The PCB375SS features a broad 12-5/8″ x 20″ aluminum dual tilting table, enabling 45 degrees left and 15 degrees right bevel cuts for a range of accurate cut angles visible on a scale conveniently and securely situated in the tabletop.
An upfront tool-less blade holder and a cam action blade tension adjustment allow woodworkers to quickly and easily change and regulate pin or
It also includes an upfront on/off switch that simplifies speed control changes between 500-1,500 SPM, a diecast aluminum frame, and a large cast iron base that reduces vibration in cutting heights ranging from 2-1/4″ (45 degrees right) and 1-1/4″ (45 degrees left) to 2-1/4″ (maximum cutting height)
Specifications
- 1.6 Amp ball-bearing induction motor
- Speeds: 500~1500
SPM - Work table: 20″ x 12-5/8″
- Table tilt: 45° right – 15° left
- Max depth of cut: 2-1/4″ @ 90° and 1-1/4″ @ 45°
Depth of throat: 18″- Stroke length: 3/4″
- 5″ Pinned and plain end saw blades
Three year limited warranty,one year free service, and90 day money-back guarantee
PS Wood 21” Scroll Saw
The PS Wood 21” scroll saw is now machined and assembled in the USA. The saw is cast aluminum. It has constant tension parallel arms and is belt driven, giving you consistent power even at different speeds. There are five speeds from 170 rpm to 1370 rpm. The Quick Change makes blade changing fast and easy. The table, measuring 14” x 22 ½” is one of the largest tables on the market. This saw is virtually maintenance free. The bronze bushings are self-lubricating and the ball bearings are double sealed. Once you have this machine, you will never need to buy another. Also included is a steel stand and two dozen of PS Wood’s awesome Super Sharps™ scroll saw blades. All that and backed by a company that prides itself on customer service.
$799 includes Saw, Stand, Quick Change, T-handle, manual, rubber feet, stand hardware and 1
Scroll Saw Specs:
Motor: 115 Volt/1.8 AMP
Throat Length: 21″
Cutting diameter: 42″
Table Size: 14″ x 22 1/2″
Table Tilt: 45 degrees L & 30 degrees R
Arm Type: constant tension parallel action
Speeds: 5 speed (170, 450, 790, 1140, 1370)
Speed Change: round belt rolls on low profile pulleys
Weight: 90 lbs
Stroke: 1″
Cut depth: 2 1/4″
Construction:
Switch: rocker-style on/off
Warranty: 5 years
*
Rikon 10-600VS Variable Speed Scroll Saw with Work Light
For fine detail work at a great price, it’s hard to beat the Rikon 10-600VS Variable Speed Scroll Saw. The saw accepts both pinned and pinless blades, and the speed can be varied from 550 to 1650 strokes per minute to suit the wood species, thickness and cutting radius.
Maximum cutting capacity is a whopping 2” thick, and the saw has a 15-3/4” throat depth. The included flexible work lamp provides good
The saw even includes a power takeoff port for attaching an optional flex shaft multi-tool—great for cleaning up edges after you’ve finished sawing.
Features
- Powerful 120V/60Hz/1.2A DC motor
- Variable speed knob lets you adjust from 550 to 1650 SPM
- Cast iron base provides stability
- Large aluminum table can be tilted from 0-45° to the left
- Accepts both pin blades and pinless blades
- Gooseneck work light for better visibility
- Comes standard with built-in dust port
Specifications
- Brand – Rikon
- Manufacturer Part Number – 10-600VS
- Weight – 28.5000
- Motor – 120v/60Hz/1.2A DC
- Height Cutting Capacity – 2”
- Throat Depth – 15-3/4”
- Blade Length” 5”
- Table Size – 10-1/16” x 15-5/16”
- Left Tilt – 0-45°
- Overall Stroke – 19/32”
- Strokes/Min – 550-1650
- Dust Port Diameter – 1-3/8”
- Sound Level at Idle (Max Speed) – 76 dB
- Tool Length – 14-15/16”
- Tool Width – 12-9/16”
- Tool Height – 24-3/4”
*
Rockwell RK7315 Shop Series Scroll Saw
Shop Series
Power is provided by a 1.2 amp motor with no load speed of 500 – 1700
This saw accepts pinned blade types. Adapters are available to allow it to accept plain end blade types
Features
- Throat Depth: 16″
- Powerful, lightweight 1.2-amp scroll saw ideal for a variety of woodworking projects
- Die-cast aluminum table bevels from 0 to 45 degrees
- Includes two durable 5″ tungsten carbide blades with a throat depth of 16″ and a cutting depth of 2-1/2″
- Variable speed control and a 4/5″ stroke ensure clean accurate cuts
- 2 year limited warranty protects against defects in materials and workmanship
*
Ryobi 1.2 Amp Corded 16 in. Scroll Saw
RYOBI introduces the 1.2 Amp Corded 16 in. Scroll Saw. The 16 in. Scroll Saw features a 16 in. maximum cutting capacity and easy, tool-free blade changes. Its cast aluminum table tilts from 0 Degree -45 Degree, while an integrated dust blower keeps the cutting surface clear of debris for maximum visibility.
A variable-speed design offers flexibility to power through a variety of applications. Backed by the RYOBI 3-Year Manufacturer’s Warranty, the 1.2 Amp 16 in. Scroll Saw includes an 18 TPI blade, a hex wrench, a switch key, and an operator’s manual.
- 16 in. throat depth ensures maximum cutting capacity for user convenience
- Tool-free blade clamp accepts plain and pin end blades
- Tilting cast aluminum table tilts tool-free from 0 degree-45 degree
- Integrated dust blower keeps the cut line clear for maximum accuracy
- 550-1600 SPM electronic variable speed to suit a variety of tasks
- Induction motor ensures long tool life and consistent performance
- Cast iron base reduces vibration for a more accurate cut
- Integrated dust port can be combined with wet/dry vacuum for a cleaner work area
- Easy-access blade tension knob makes adjustment quick and easy
- 3-year manufacturer’s warranty
- Includes: (1) SC165VS 1.2 Amp 16 in. Scroll Saw, (1) 18 TPI blade, (1) hex wrench, (1) switch key, and operator’s manual
Seyco ST-21 Scroll Saw
Seyco’s NEW ST-21 Positive Swing Tilting Head* Scroll Saw. Featuring Performance Proven link drive system, finger operated blade clamps, constant power variable speed motor, extra large 16 1/4″ X 24 1/4″ table with replaceable protective cover with “Top Feeders” graphic assists for easy alignment with blade slot in table, Digital blade angle readout with lighted background, generous 8 plus inches in front of the blade.
Positively no wobble or play in the head when you set the desired blade angle. The stand is an integral part of then saw and naturally comes with it as well as a foot switch.
Features and Specifications
This scroll saw accepts pinless blade types.
*
Shop Fox W1713 Scroll Saw
Variable speed control, extra cutting capacity
Features
- Variable speed motor
- Cast iron table
- Gooseneck
worklight - Dust blower and 1-1/4 inch dust port
- Ability to cut at angles from 0-45-degrees with the table tilt mechanism.
Specifications
- 1/8 HP, 1.2 Amp, 120V, Single-phase, 60HZ
- No-load speed: 550-1650 SPM
- Maximum cutting thickness: 2 inch
- Maximum cutting width: 16 inches
- Blade stroke: 3/4 inch
- Machine Weight: 31 lbs.
- Approximate Shipping Weight: 40 lbs.
- Accepts Plain and Pin-End Blades
*
Shop Fox W1870 – 18″ VS Scroll Saw with LED and Rotary Tool Kit
The Shop Fox Scroll Saw offers all of the most sought after features, including variable speed control, extra cutting capacity, and cast iron construction. It also features a gooseneck work light, dust blow and dust port, large 45° tilt table, flexible shaft rotary tool, and 64-pc.
Specifications
- Motor: 1/8 HP, 115V, single phase, 0.6A, 60 Hz
- Variable speed motor
- No load speed: 550-1600 SPM
- Max cutting thickness: 2-1/4″
- Max cutting width: 18″
- Blade stroke: 5/8″
- Table size: 19″ x 10″
- Cast iron table tilt: -10° to 45°
- Approximate shipping weight: 53 lbs.
- Uses pin blades
- Pin-less blade adapter included
- LED
worklight - Approximate shipping weight: 53 lbs.
*
WEN 3921 16-inch Two-Direction Variable Speed Scroll Saw
Remember when your scroll saw could cut in two different directions? Take on the most intricate and artful cuts with the WEN 16-Inch Variable Speed Two-Direction Scroll Saw.
The 9/16-inch stroke saws through hardwoods up to two inches thick. Adjust the speed anywhere from 550 to 1600 strokes per minute with the simple turn of a knob.
The cast iron base prevents vibration and walking during operation while the spacious 16-by-11-inch table bevels up to 45 degrees for
The adjustable air pump clears sawdust from your work area to give you a clear line of vision as you cut. This combined with the 1-1/2-inch dust port keep your work area clean so you can focus on your woodworking.
The saw also includes a hold-down foot clamp for securing your project in place along with a flexible work light that bends and adjusts to whatever position your heart desires.
This unique blade holder accepts both pinned and pinless blades while also allowing users to change the direction of their cut to accommodate their particular workpiece.
For pinned blades, simply pop the pins out of the front holder and turn the blade 90 degrees. Now, your cuts are no longer confined by the 16-inch throat of the scroll saw. On top of that, our removable pinless blade holder design tightly grips blades to prevent them from coming loose during operation.
Onboard blade and holder storage creates simple organization solutions between jobs.
And
Specifications
- Unique design accepts blades in two directions (standard and 90 degrees) to allow for infinite ripping capacity
- Variable speed goes from 400 to 1600 strokes per minute
- Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts
- Cuts wood up to 2 inches thick with a 16-inch throat depth in the standard position
- Features a thumb screw blade adapter for tool-free blade changes, a cast iron base, an air pump, a flex light, a dust port, a foot lock clamp, onboard storage, and three blades
- Accepts both pinned and pinless blades
Conclusion
Thank you for visiting our scroll saws page. I hope this has been helpful and you have enjoyed your visit.
I hope this has been helpful and you have enjoyed your visit. Let us know if you have any questions in the comments section below.
While you are here, check out some of our other pages for information on:
Scroll Saw Patterns
Scroll Saw Blades
Tips and Tricks
Scroll Saw Websites
Subscribe to our blog and we will notify you by email whenever a new article is posted.
Thank You and Keep on Scrolling